Aluminium Profile Bending Machine (PBA-150D)
PBA-150D CNC Arc Bending Machine for Aluminium/Copper/Mild Steel sections can do bending of different types like “C”, “U”, “Multiple U”, “O” “Rectangular Frames” etc. The machine has preloaded cycles to carry out all cycles and also calculations.
Features and Functionality:-
- Easy to use Industrial Touch Screen Interface (HMI) with PLC) Ideally suited for factory environments.
- Adopts Special Arc Processing Software which can detect the data of rebound and then eliminate it the rebound.
- Bending Press Hydraulic Cylinder is controlled by servo valves with positional feedback to have higher bending accuracy.
- All three bending rollers are controlled by Inverters with single feedback encoder for positioning and movement of profile.
- 7.5 HP Hydraulic Power Pack is capable of bending higher thickness Aluminium sections and thinner mild Steel sections.
- Sections up to 160mm width and 200mm height can bend with the requisite moulds and inserts. Inserts are critical for thinner aluminium sections to avoid deformation and shrinkage etc.
- Multiple preloaded cycles on the HMI have various kind of options to bend a variable pool of bends for wide range of profiles.
- All bend calculations and roll positioning can be derived through the HMI from the calculator page.
| Technical Specification |
| Voltage
| 400 v, 3~, 50 Hz
|
| Main roller Bending Motor
| 2.2 Kw
|
| Hydraulic Power Pack
| 5 Kw
|
| Support Roller Pulling Motor
| 1.5 Kw X2
|
| Bending Pressure
| 16 Tons
|
| Compressed Air
| 7 Bar/100psi
|
| Air Consumption
| 200 Litre. Per cycle
|
| Dimensions(Length, Width, Height)
| 1520x1200x1450 mm
|
| Weight
| 750 Kg
|
