Corner Cleaning Cum End Milling Machine (CCE-1T3)
The Machine comes with pneumatic clamping, Pneumatic feeding, multiple cutting depth and angular milling option. It accommodates milling cutter with ID as 32 mm and Maximum OD up to 140mm. It does corner cleaning of welded profile by selection of operating mode.
Features and Functionality:-
- Both end milling and corner cleaning operation are done automatically.
- Includes a swift and easily changeable blade holding system is used in the machine so that many kinds of profiles can be operated.
- Selection of end milling or corner cleaning is easily done by a selector switch.
- Top and bottom surface and backside cleaning of the welded profile is carried out in one cycle.
- Milling speed adjustment is by pneumatic feed control valves.
- Ability to operate on different angle profiles.
- Pneumatic clamping system.
- A special operation table preventing the profile to slip or get misplaced.
- Feature of automatic go-back of the process to the start point.
- Support arm for long profiles.
- Includes blade storing compartment.
- All precautions taken against work accidents.
- Power unit is protected against voltage overload.
| Technical Specification |
| Voltage
| 3~, 400-440v, 50Hz
|
| Milling Spindle Speed
| 2800 rpm
|
| Power Output
| 1.1 kw
|
| Compressed Air Supply
| 6 bar minimum
|
| Air Consumption
| 15 ltr per cycle
|
| Dimensions(Length, Width, Height)
| 1040x960x1560 mm
|
| Weight
| 295 Kg
|
